Some Network Sometimes Supports prov configuration settings before they permit access to their restriction,which means that personal or default configuration is restricted to their access which demand for protocol or major configuration settings ,these setting are mainly the proxy address,port number and accesspoint
IF you find it difficult in creating a prov configuration settings for any of your preffered network,follow this few trick to create,configure and setup your prov configuration settings
=>you need a prov Creator or generator for your mobile device..(if you dont have any), Click HereTo download one
=>After downloanding the application,Launch the application and enter the configuration details into the appriopriate field for your preffered network type (homepage,username,password,proxy address,port,accesspoint etc)
NOTE;you can leave all the field blank,but make sure you fill the proxy address,port number and the accesspoint with the best details that suite your network operator or service provider,eg.for mtn,the proxy is 010.199.212.002 ,The Port Number Is 8080 and the accesspoint;web.gprs.mtnnigeria.net
=>After filling the fields with the correct configuration setting for your preffered network type,click on the "Ok" bottom to save your configuration settings as a prov file
It will either be saved in your phone internal memory (gallery) or in your external memory(memory card) depending on the permission access and it will display a "?" logo for the file which means it is not supported or cannot be edited as a raw file untill to change it to a proccessed file
You Have Successfully Created A prov configuration Setting For Your Network
To Proccess and make The Prov Configuration works for what you created it it for;
Send the prov configuration file through bluetooth,After You Have Sent It,you will recieve a messege "new configuration setting" recieved
=>Save the settings to use it,to do so;goto setting >configuration >default configuration and select the prov file as your default configuration setting,after that,activate it for all application
Thats all...Hope It helps...
DONT JUST READ AND WORK AWAY...REMEMBER TO LEAVE YOUR QUESTIONS AND SUGGESTION USING THE COMMENT LINKS AND I WILL REPLY BACK
Also Dont Forget To Share This With Your Friends Using The SHARE LINK
You Can Also VISIT OUR FORUM OR REGISTER FOR OUR ONLINE SCHOOL
other ways to connect with us
CONNECT WITH ME ON FACEBOOK . OR Like our FANPAGE At www.facebook.com/emmatechnique And CONNECT WITH ME ON TWITTER. OR FOLLOW US ON TWITTER AT www.twitter.com/emmatechnique. OR JOIN ME ON LINKEDIN , . SUBSCRIBE TO OUR UPDATESconnect with me 2GO username;Emmanuel5632
0 comments:
Post a Comment